How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

1.Choose the suitable led post top fixtures

This is the first step in how to install the led post top fixtures.

  • Choose the best post top light fixture for your space. In most residential environments, it is best to use an 10-foot post top light fixture. These provide a lot of overhead lighting without spilling into a neighbor’s yard.
  • Choose your lighting style. Some post top light come with a bulb. Others provide brighter light or scattered light through multiple bulb settings.
  • Select a shade. Clear shade provide more light. Frosted glass shade provides more ambient lighting.
  • Coordinate your existing outdoor wall lights and other lighting hardware to create a more cohesive look.

Tip: pair the post top light fixture in the yard with decorative elements in the front or back yard, such as flower troughs or dining tables.

How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

2.Digging holes and ditches

  • Create a hole with a depth of 18 to 24 inches and a diameter of 6 inches using the rear hole digger. Check the led post top fixtures manufacturer’s Guide.
  • Fill the bottom with 6 inches of gravel.
  • Dig a groove from the post top light fixture to the power supply with a shovel.
  • Place soil on a plastic tarpaulin during excavation to make the area easier to f

Tip: electrical specifications may vary in the appropriate depth of embedded conduit, but a good rule of thumb is that for PVC 18 inches, 24 inches for direct buried wires, 6 inches for RNC (rigid non-metallic conduit).

How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

3.Consider the Wiring

Figuring out the way to wire a post top light fixture isn’t always difficult. The first choice is to certainly twine your lamp submit to a nearby outlet. Use a GFCI-included one established on a nearby deck, patio or porch.

  • Before you start, locate the opening you want to connect with your post top light fixture. Understand how some distance aside those factors are.
  • When you measure the gap from the outlet to the post top light fixture, you may recognize how a great deal conduit to shop for on your light fixture.
  • Run plastic conduit from the light to the opening. rigid non-metal conduit (RNC) can be the first-class choice. it’s far considered a safer desire to bury underground.
How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

4.Connect the Conduit

  • This is the basic procedure for wiring the psot top light fixture to a socket with a rigid non-metallic conduit (RNC).
  • Use elbows to deliver the conduit down from the residence and into your trench. reduce pieces as essential.
  • Add conduit to the elbow in your post hole region so it comes up approximately 6 inches above the floor.
  • Connect your conduit with PVC cement. Put the correct length of grade 12 UF wire through the pipe.
  • Leave an extra 10 feet at the sentry box. Leave about 6 to 8 feet of conduit in the house to reach the circuit breaker box.
How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

5.Installation with concrete

  • Place the conduit with the installed wire in the groove.
  • Fill the trench with soil remaining on the plastic tarpaulin.
  • Pour the ready mixed concrete into the hole, taking care to expose the conduit for 6 inches. Do not mix concrete into conduits or wires.
  • Use a concrete float to smooth the top.
How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

6.Insert the Lamp Post

  • Place the post top light fixture down on the ground and pull the wire from the bottom to the top.
  • Slide the shaft of the column through the conduit and push it into the concrete about 12 inches.
  • When working, make sure that the wire is exposed from the top of the terminal.
  • Use two work belts and wrap them around the posts.
  • Put them on the ground about 36 inches from the post.
  • Place them on opposite sides to help keep them straight.
  • Adjust the working belt while the level is aligned with the light pole.
  • Once the level is flat, place the lamp post for at least four hours.

Tip: for best results, set the concrete for 8 hours or overnight before moving the work belt.

How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

7.How to Wire the Led Post Top Fixtures

Remove the work belt after the concrete has hardened. It’s time to connect the lantern to the pole. For this part, you will need a knife, stripper and nut. Before you start, make sure that all power on the main breaker box is off.

  • Strip 2 to 3 inches of insulation from the UF wire on the side of the lamp post. Look for white, black and green or copper wire. There should be matching wires on the side of the lantern.
  • Use wire strippers to expose approximately 1 / 2 inch of bare copper on all wires. Do this on the side of the post and lantern. Pair the wires on the lantern to the terminals according to the color. Fix the connected pairs together with steel nuts.
  • Mount the post top light fixture onto the post. Tighten it with the screws provided to hold it in place.
  • Employ a licensed electrician to connect the wires to the appropriate breaker box or to make all wiring from the beginning to the end.

Tip: consider using a professional electrician to add switches to new post top light fixture or renovate existing switches.

How-to-Install-Led-Post-Top-Fixtures-Step-by-Step

Installing led post top fixtures is a simple way to add outdoor lighting to the courtyard. You can follow the step-by-step instructions in this guide or use our professional installation services. When you are ready to get a new led post top fixtures or the tools you need to get the job done, we will provide online orders when and where needed.